SPINDLE vs MANDREL: NOUN
- One of the skewers or axes of a spinning-machine upon which a bobbin is placed to wind the yarn as it is spun. See cut under spinning-jenny.
- Something having the form of a spindle (sense 1); a fusiform object.
- The roll of not yet unfolded leaves on a growing plant of Indian corn.
- In conchology, a spindle shell.
- In anatomy, a fusiform part or organ.
- A spindle-cell.
- The inner segment of a rod or cone of the bacillary layer of the retina. See cut under retina.
- In embryology, one of the fusiform figures produced by chromatin fibers in the process of karyokinesis.
- In geometry, a solid generated by the revolution of the arc of a curve-line about its chord, in opposition to a conoid, which is a solid generated by the revolution of a curve about its axis.
- A measure of yarn: in cotton a spindle of 18 hanks is 15.120 yards; in linen a spindle of 48 cuts is 14,400 yards.
- A long slender stalk.
- Any slender pointed rod or pin which turns round, or on which anything turns.
- The pin which is used in spinning-wheels for twisting the thread, and on which the thread, when twisted, is wound. See cut under spinning-wheel.
- In hand-spinning, a small bar, usually of wood, hung to the end of the thread as it is first drawn from the mass of fiber on the distaff.
- A cytoplasmic network composed of microtubules along which the chromosomes are distributed during mitosis and meiosis.
- A baluster.
- A spike on which papers may be impaled.
- Any of various long thin stationary rods, as.
- Any of various mechanical parts that revolve or serve as axes for larger revolving parts, as in a lock, axle, phonograph turntable, or lathe.
- A pin or rod holding a bobbin or spool on which thread is wound on an automated spinning machine.
- A similar rod or pin used for spinning on a spinning wheel.
- A rod or pin, tapered at one end and usually weighted at the other, on which fibers are spun by hand into thread and then wound.
- (biology) tiny fibers that are seen in cell division; the fibers radiate from two poles and meet at the equator in the middle
- Any of various rotating shafts that serve as axes for larger rotating parts
- Something very thin and slender.
- A rod used for spinning and then winding natural fibres (especially wool), usually consisting of a shaft and a circular whorl positioned at either the upper or lower end of the shaft when suspended vertically from the forming thread.
- A slender rod or pin on which anything turns; an axis.
- The female side in descent; in the female line; opposed to spear side.
- See Spindle, 7. above.
- The revolving spindle of a machine tool; the spindle of the headstock of a turning lathe.
- A spindle in a machine tool that does not revolve; the spindle of the tailstock of a lathe.
- Any marine gastropod of the genus Fusus.
- Any marine univalve shell of the genus Rostellaria; -- called also spindle stromb.
- A solid generated by the revolution of a curved line about its base or double ordinate or chord.
- A yarn measure containing, in cotton yarn, 15,120 yards; in linen yarn, 14,400 yards.
- A long and slender stalk resembling a spindle.
- The fusee of a watch.
- A shaft or pipe on which a core of sand is formed.
- The vertical rod on which the runner of a grinding mill turns.
- The shaft, mandrel, or arbor, in a machine tool, as a lathe or drilling machine, etc., which causes the work to revolve, or carries a tool or center, etc.
- A stick or pin used to twist the yarn in spinning
- The long, round, slender rod or pin in spinning wheels by which the thread is twisted, and on which, when twisted, it is wound; also, the pin on which the bobbin is held in a spinning machine, or in the shuttle of a loom.
- Any shrub or tree of the genus Eunymus. The wood of E. Europæus was used for spindles and skewers. See Prickwood.
- A tool or component of a tool that grips or clamps something, such as a workpiece to be machined, a machining tool or a part while it is moved.
- An object used as an aid for shaping a material, e.g. bending a pipe without creasing or kinking it.
- A lathe with a stout spindle, adapted esp. for chucking, as for forming hollow articles by turning or spinning.
- The live spindle of a turning lathe; the revolving arbor of a circular saw. It is usually driven by a pulley.
- A bar of metal inserted in the work to shape it, or to hold it, as in a lathe, during the process of manufacture; an arbor.
- A mandrel fitted to a bearing or bearings of a support which may be set in the tool-post of the slide-rest of a lathe, or in some other traversing device. Such mandrels are used for expanding reamers and analogous tools, and they are usually driven by a pulley-and-belt mechanism.
- In metal-working by the spinning process, the form, usually of wood, upon which the thin plate of metal or blank is pressed in order that the revolution may give it the form of the mandrel.
- A miners' pick.
- In mech., a cylindrical bar or spindle, either of uniform diameter, of different diameters, or tapered, used for a variety of purposes, but chiefly for the support of objects formed with holes, into which the mandrel is forcibly driven in order to hold them firmly while turning in a lathe, or in an analogous machine, or in operating upon them with a file.
- A shaft on which a working tool is mounted, as in a dental drill.
- A metal rod or bar around which material, such as metal or glass, may be shaped.
- A spindle or an axle used to secure or support material being machined or milled.
- Any of various rotating shafts that serve as axes for larger rotating parts
SPINDLE vs MANDREL: INTRANSITIVE VERB
- To shoot or grow into a long, slender stalk or body; to become disproportionately tall and slender.
- To grow into a thin, elongated, or weak form.
- To impale or perforate on a spindle.
- To furnish or equip with a spindle or spindles.
- N/A
SPINDLE vs MANDREL: OTHER WORD TYPES
- To shoot or grow in a long, slender stalk or body.
- A piece of wood that has been turned on a lathe; used as a baluster, chair leg, etc.
- Any holding device consisting of a rigid, sharp-pointed object
- Used as a baluster, chair leg, etc.
- To operate upon with mandrels, as a bronze gun.
SPINDLE vs MANDREL: RELATED WORDS
- Centerline, Pin, Celled, Automatics, Axis, Nacelle, Shaft, Swivel, Rod, Axle, Countershaft, Tailstock, Mandril, Arbor, Mandrel
- Extrusion, Nozzle, Coil, Fastener, Allen wrench, Dowel, Ferrule, Flange, Collet, Workpiece, Continent, Chuck, Mandril, Arbor, Spindle
SPINDLE vs MANDREL: DESCRIBE WORDS
- Speed, Brooch, Tree, Centerline, Pin, Celled, Axis, Nacelle, Shaft, Swivel, Axle, Countershaft, Tailstock, Arbor, Mandrel
- Spline, Extrusion, Nozzle, Coil, Fastener, Allen wrench, Dowel, Ferrule, Flange, Collet, Workpiece, Continent, Chuck, Arbor, Spindle
SPINDLE vs MANDREL: SENTENCE EXAMPLES
- Abnormal spindle protein to organise microtubules of the central spindle for cytokinesis in Drosophila.
- In most cases, the breakdown of the spindle appears in the spindle itself, within the spindle or in the bearings.
- The spindle amplifier number of each spindle is not set in parameter No.
- We carry a large selection of Poulan Spindle Parts and Spindle Assemblies.
- Spindle Assemblies we have the Spindle Assembly for Cub Cadet OEM!
- Spindle engagement lever makes the spindle turn forward or reverse.
- SPINDLE SPEED ARRIVAL CHECKWaiting for spindle speedarrival signal.
- Find 42552 spindle bearings from spindle bearings Super Wholesalers spindle bearings Wholesaler Supplier for your sourcing needs from China.
- Then, the spindle device is disassembled to replace the spindle, the parts within the spindle or the bearings, thereafter the spindle device is reassembled.
- SPINDLE INNER BEARINGS OUTER BEARINGS SEAL BRAND HN SPINDLE HP SPINDLE.
- You could do everything with the steel mandrel.
- Mandrel pulls shall be witnessed by the COR.
- In one embodiment, the system includes a first mandrel having a first external thread about an external surface of the first mandrel.
- If a wire brush mandrel is needed to dislodge an obstruction, attach the wire brush mandrel to the pull line.
- Third: chuck the wheel in the improved mandrel and then the mandrel in the drill press.
- It is a positive type of expansion, in that, for the mandrel topass through, the casing must expand to the diameter of the mandrel.
- Standard mandrels mandrel is the most durable of the threeflexible mandrel configurations because it uses the largest size links possible.
- Construction control of mandrel driven piles should include a wave equation analysis that accounts for the improved pile drivability from the mandrel.
- Quick change mandrel bodies precluding the need to thread them on and off the mandrel rod.
- Lok Assemblies, Adjustment Service Wrenches, Removable Mandrel Collection Bottle for Spent Mandrel.
SPINDLE vs MANDREL: QUESTIONS
- When do spindle fibers become visible during mitosis?
- Does Wnt regulate spindle asymmetry in Caenorhabditis elegans?
- What contributes to spindle assembly during animal mitosis?
- How are oocytes classified according to spindle size?
- What happens to spindle fibres during cell division?
- Why are spindle microtubules important to mitotic kinetochores?
- What is anaplastic spindle-cell squamous thyroid carcinoma?
- What happens during the spindle assembly checkpoint?
- What kind of spindle does an Oliver spindle shaper have?
- What is the spindle speed of spindle in spindle spindle?
- Why does the leading edge of the drift mandrel need to be rounded?
- What is the best mandrel for a sub-spindle on a lathe?
- How do you remove a mower blade from the blade mandrel shaft?
- What is the warranty for the mandrel exhaust bend pipes?
- When should I replace the spacer under the mandrel pulley?
- What happens when the spring is removed from the mandrel?
- How much does a 10ry-3000 Sunnen line honing mandrel cost?
- How are the grooved facets produced in a mandrel 105?
- What are the principles of Rotary draw mandrel bending?
- Why choose a hurricane headers mandrel bent extractor?