Difference between Sharpen and Taper

SHARPEN vs TAPER: NOUN

Someone who works with tape or tapes.
One who operates a tape machine.
The property possessed by a shape that narrows toward a point (as a wedge or cone)
A convex shape that narrows toward a point
Stick of wax with a wick in the middle
A loosely woven cord (in a candle or oil lamp) that draws fuel by capillary action up into the flame
A tapering form; gradual diminution of thickness in an elongated object.
A small or very slender candle.
A candle, especially a very slender candle; any device for giving light by the agency of a wick coated with combustible matter.
Tapering form; gradual diminution of thickness in an elongated object; that which possesses a tapering form: as, the taper of a spire.
A small wax candle; a small lighted wax candle; hence, a small light.
A gradual decrease, as in action or force.
A gradual decrease in thickness or width of an elongated object.
A source of feeble light.
A gradual decrease of power or capacity.
A long wax-coated wick used to light candles or gas lamps.

Gradually decreasing in size toward a point.
Regularly narrowed toward the point; becoming small toward one end; conical; pyramidical.

To make sharp or sharper; render more acute, keen, eager, active, intensive, quick, biting, severe, tart, etc.: as, to sharpen a sword or a knife; to sharpen the appetite; to sharpen vinegar.
In music, same as sharp.
To grow or become sharp.
We cannot enjoy the movie"
To make something sharp; put a keen edge or sharp point on something.
In music, same as sharp, v., 2.
(transitive; intransitive verb) To make or become sharp or sharper.

Long and becoming slenderer toward the point; becoming small toward one end.
To cause to taper; make gradually smaller, especially in diameter; cause to diminish toward a point.
To stop slowly or by degrees; cease gradually.
To spring up in or as in a tall, tapering form.
To diminish; grow gradually less.
To become taper; become gradually slenderer; grow less in diameter; diminish in one direction.
Diminished; reduced.

Reinforce, Stiffen, Enhance, Toughen, Improve, Deepen, Refine, Refocus, Strengthen, Intensify, Hone, Point, Taper, Focus, Heighten

Acumination, Sag, Scrolling, Acuminate, Tape, Scroll, Withdrawal, Thin, Reamers, Reduction, Wax light, Point, Candle, Sharpen, Wick

Tighten, Reinforce, Stiffen, Enhance, Improve, Deepen, Refine, Refocus, Strengthen, Intensify, Hone, Point, Taper, Focus, Heighten

Droop, Orange stick, Triblet, Spindleshanks, Acumination, Sag, Acuminate, Tape, Withdrawal, Thin, Reamers, Point, Candle, Sharpen, Wick

Everything is a fucking gcd except Sharpen Blade.
Disasters in Brandenburgand Saxony would sharpen the pain.
Sharpen your skills in the hero demo mode.
Sand Stone - Can You Sharpen On It?.
Other knives you can sharpen yourself whenever you want, but with Cutco knives you need Cutco to sharpen them for you.
Sharpen the teeth with a small saw file, and use the file to sharpen the nose, taking care to maintain the critical angles.
As one of the final steps, use the Unsharp Mask or the Smart Sharpen filter to sharpen the clarity of edges in the image.
Sharpen their logical skills as they have fun sequencing actions build and sharpen their logical as.
Want to help your children sharpen their fine motor skills and to sharpen their creativity?
Sure, you have to sharpen differently compared to how you sharpen Bayer RAW files, but it is possible.

Should I use a scale for a Mirtazapine taper or do a liquid taper?
Taper jig Being able to cut a taper on a table saw is a cool trick.
In taper turning, the tool is fed at an angle, so taper turning creates a tapered cylinder or conical shape.
But it also hasa thinner gouge so the taper is perhaps similar to the taper of other Ling reeds.
This same taper schedule and rescue taper protocol was used for all patients, regardless of when treatment was discontinued.
Taper grinding Taper grinding on long workpieces can be done by swiveling the upper table.
CV taper point needles are designed with slim taper ratio geometry and without cutting edges to decrease leakage in vessels.
Dimensional spindle taper gauges designed for the Morse taper standard (DIN 229).
Bax teixir, taper, a taper, from Ir tapar, W tempr.
Taper Attachment The Taper Attachment is fitted to the rear of the carriage and permits taper turning without disengaging the cross feed screw.