Difference between Chamfer and Bevel

CHAMFER vs BEVEL: NOUN

An obtuse-angled relief or cut at an edge added for a finished appearance and to break sharp edges
The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc.
A bevel or slope; the corner of anything originally rightangled cut away so as to make an angle with the sides which form it. Also chamfering.
In carpentry, a groove or furrow.
A furrow or groove, as in a column.
A flat surface made by cutting off the edge or corner of a block of wood or other material.
Two surfaces meeting at an angle different from 90 degrees

The angle or inclination of a line or surface that meets another at any angle but 90°.
A hand tool consisting of two rules that are hinged together so you can draw or measure angles of any size
Two surfaces meeting at an angle different from 90 degrees
Two rules joined together as adjustable arms used to measure or draw angles of any size or to fix a surface at an angle.
The obliquity or inclination of a particular surface of a solid body to another surface of the same body; the angle contained by two adjacent sides of anything, as of a timber used in ship-building. When this angle is acute it is called an under bevel (or beveling), and when obtuse a standing bevel.
An instrument used by mechanics for drawing angles and for adjusting the abutting surfaces of work to the same inclination.
A piece of type-metal nearly type-high, with a beveled edge, used by stereotypers to form the flange on the sides of the plates.
Same as bevel-angle.
In heraldry, an angular break in any right line.
Any angle other than a right angle; the angle which one surface makes with another when they are not at right angles; the slant or inclination of such surface.
An instrument consisting of two rules or arms, jointed together at one end, and opening to any angle, for adjusting the surfaces of work to the same or a given inclination; -- called also a bevel square.
An edge that is canted, one that is not a 90 degree angle.

Cut a bevel on
Shape to a bevel
In carpentry, to cut a furrow in; flute; channel.—2. To cut or grind in a sloping manner, as the edge of anything square, so as to form a bevel.

To incline toward a point or from a direct line; slant or incline off to a bevel-angle.
Having the form of a bevel; aslant; sloping; out of the perpendicular; not upright: used figuratively by Shakspere.
To cut to a bevel-angle: as, to bevel a piece of wood.
Cut a bevel on
Shape to a bevel

Dowel, Kerf, Drum sander, Concave, Ogee, Swage, Serration, Countersink, Part, Party, Bezel, Flange, Chase, Furrow, Bevel

Soleplate, Crop, Tab, Cut, Slant, Trim, Triangular, Protractor, Bezel, Flange, Bevel square, Camfer, Inclined, Cant, Chamfer

Dowel, Kerf, Drum sander, Concave, Ogee, Swage, Serration, Countersink, Party, Part, Bezel, Flange, Chase, Furrow, Bevel

Nosepiece, Countersink, Soleplate, Crop, Tab, Cut, Slant, Trim, Triangular, Protractor, Bezel, Flange, Inclined, Cant, Chamfer

Use headed pins to allow clearance for chamfer cuts.
Chamfer is generally produced with a small burr.
Pay attention to the type of tap chamfer.
Square pipe ends, chamfer and remove all dirt.
Chamfer then tries to change all these nodes.
You can see the final look here, with the lighter chamfer on the top edge and the super heavy chamfer on the bottom edge.
PVC drip edge chamfer for use where doors, windows, dock doors and archways require both a chamfer and drip edge.
After trimming, and while still in the electric drill, you can chamfer the inside and outside of the cases with the chamfer tool.
Osborne is also able to Chamfer and drill a hole in the chamfer for your hanger bolt.
The new Fixed Weight Chamfer keeps a consistent chamfer width.

By clicking on the Bevel Spline button, you can select a spline to define the bevel shape.
The zerol bevel gearis a special case of a spiral bevel gear and islimited to special applications.
First, lock the bevel clamp and engage the bevel latch.
Insert the bevel into the dermis, bevel uppermost, to a distance of about 2 mm.
Straight bevel gears are the most common and also the simplest type of bevel gear.
Spiral bevel gears are more difficult to manufacture than straight bevel gears.
Bevel to scuppers and shape, feather or bevel at similar conditions.
Bevel stops are presets that allow quick adjustments for bevel cuts.
The radial arm saw is primarily used for crosscutting but it does wonders with bevel mitering, mitering, bevel ripping, ripping, and bevel crosscutting.
Properties such as bevel style, bevel depth, bevel hole depth, and extrusiondepth determine the look.